All you need to know about the anatomy of a skateboard

All you need to know about the anatomy of a skateboard

Through this article, you will learn all about the anatomy of skateboarding. If you are a beginner and want to understand how each of the parts works or if you want to assemble your board yourself, then this post will be useful to you. Depending on the activity you want to do in skateboarding, you must have the right parts with you.

For example, if you are cruising or street skateboarding, you will not need the same types of wheels. The same goes for the board and other details.

It’s these reasons why you must know how each of the parts works and how to choose the right one for you.

Through this article, you will discover the different parts constituting a anatomy skateboard and their usefulness.

By the end of your reading, you will have all the necessary information for you to make the right choice.

As a beginner, it may be difficult to understand the operation of each of the parts but it will no longer be a problem for you in a few minutes.

The parts of an Anatomy of skateboard

You should know that a anatomy skateboard is usually designed in 4 pieces. There will be the board, the wheels, the trucks, and the bearings.

These are the 4 main parts that determine your anatomy skateboard and each of them has a very specific purpose.

All of these parts will allow you to have a skateboard that is solid and that allows you to do the activities you want.

Now that you know what the 4 main parts are, you will learn in detail that each one corresponds.

The Deck

The board is the main part of your skateboard and it will be in this place that your feet will be.

There is a multitude of types of boards but the most recommended for beginners is the popsicle type.

A board consists of a nose and a tail.

The nose consists of being at the front of your board and the tail at the end.

The popsicle type is the most advisable for people who are just starting because it is what allows you to have the best possible stability and a good start to learning easy tricks.

A popsicle board means that the angle of the nose and the angle of the tail of your board are almost 100% symmetrical.

This way you will have a better balance and a better rotation of your board for example if you want to do flips.

In addition, a board can be made in different ways.

There are Canadian maple decks and others made of bamboo.


Canadian maple wood decks are the most popular on the market.

By the way, this is the one you see all the time and which is used as much by beginners to speak professionally.

The reason is that it’s a wood that does not cost very much and has very good strength and flexibility.

These are important details and advantages in skateboarding so that you have a responsive and fast board to control.

In addition, for very advanced tricks you must have a very strong board. Generally, maple leaf boards consist of 7 sheets.

This allows a very good balance between the flexibility and the solidity of the board.

You’ll also find boards with 8 or 9 maple leaves which will allow you to have a much stronger skateboard.

However, this is often advised to people that weigh more than 220 lbs.


If you have been interested in skateboarding for not very long, you may have never heard of bamboo boards and yet they exist.

They have been marketed by the bamboo skateboard brand which offers extremely beautiful and solid boards.

The reason why some people prefer bamboo is that environmentally speaking they are better suited.

The reason is that bamboo grows much faster than maple and therefore causes less damage to the environment.

So if you are a sensitive person on this subject this could be a good reason to choose a bamboo board.

These are known to be extremely strong. It is very difficult to break a bamboo board and as a beginner know that it will be impossible.

So if you are looking for a very sturdy skateboard that you want to have for years, choosing a bamboo board would be a good idea.

In addition, they are known to be more flexible than boards made of Canadian maple wood. Who says flexible says very good control of the board.

After that will depend on your tastes and what you like.

The trucks

Trucks are the T-shaped parts made of aluminum that you find on your anatomy skateboard. All types of skateboards, there are two of them.

Their main role is not only to make your skateboard responsive but also to attach the wheels to your board.

Be aware that trucks are the heaviest part of your skateboard. For this reason, you must choose trucks that are not only light enough but also robust.

This way you will have better ease in popping your board or doing flips while having solid trucks.

There are several types of trucks.

There are the classics and the Hollow types that are emptied inside.

The companies remove all the aluminum inside that is not necessary to lighten them and therefore make them lighter.

But they sometimes have a problem with solidity: there are brands like independent or thunder that have trucks that are very well known and very loved by skateboarders.

Also, the angle of it has its importance.

You can have trucks that have a number between 45 and 55 degrees. This means that the greater the angle, the sharper turns you will be able to make.

Your skateboard will be easier to turn which can be convenient for example for carving.

For those with a lower number of degrees, this will allow you to have better stability on the road which is good for beginners.

The wheels

The wheels are logically the part that allows your skateboard to roll.

They are directly attached to your trucks.

There is a multitude of choices and brands that can be very suitable for any type of level. First of all, know that the wheels are made of polyurethane.

This is the best manufacturing material for the wheels so that it is strong and you can have them for a long time. Avoid taking wheels that are not made with this material.

In addition, to feel the difference between the quality of wheels, it will be the type of polyurethane chosen by the company.

You should know that there are more solid materials than others and some companies like to be cheap.

So choose wheels from a company that chooses a very good quality polyurethane. The choices of wheels are essential for a skateboard.

The reason is that depending on the activity you want to do they are not the same depending on your needs.

For this, you need to take into account the types of hardness and diameter.

The durometer

The type of hardness on wheels will indicate their hardness.

This is a figure between 78A and 101A. The higher the figure, the harder it means that the wheels are. If you do street skateboarding then you’re going to need some hard wheels.

If you are cruising then you will need soft wheels.

Hard wheels are between 78A and 87A. Soft wheels are between 99A and 101A.

The advantage of hard wheels in street anatomy skateboard is that they allow you to go fast on the road and have good control of your skateboard.

They are perfectly adapted for street parks and they allow you to have a good grip during tricks, for example, powerslides or grinds.

For soft wheels, the great advantage for cruising is that they allow them to absorb shocks and vibrations on the road.

If you want a skateboard as a means of transport then your feet must be comfortable on the road.

So they will allow you to absorb shocks. It is through these details that you understand the importance of choosing wheels.

The diameter

Now that you know what kind of hardness to choose about the activity you want to do, there is now the diameter.

Be aware that the larger the diameter, the higher the acceleration and the lower the speed.

Depending on what you want to do, take what suits you.

Also if you have a skateboard or a longboard, necessarily you must have a diameter suitable for your board.

Otherwise, the imbalance will not allow you to have a good experience on the road.

The diameter can range from 50 mm to 60 mm.

For street skateboarding, it is better to choose wheels between 50 and 56 mm. For cruising, take a higher value.

The bearingsĀ 

The bearings are the parts that you see the least on the skateboard and yet they all have their importance.

These are pieces that don’t cost much and you have 8 of them on your board in total.

This will determine the rolling speed time of anatomy skateboard.

In addition, the more good quality bearings you have, the longer your acceleration will be and the smoother your rolling will be.

There are brands like Bones that offer very good quality bearings that you are sure to have for a very long time.

For it to have a long service life, you must take care of them and clean them.

This is one of the pieces that will require the most attention on your skateboard. So if you want to have them for a long time, you need to clean and lubricate them.

There is a term to indicate the quality of bearings. It will be with the ABEC report.

You have ABEC-1, -3, -5, and much more. The higher the figure, the more it means that they are of good quality.

So you will have understood it you must avoid bearings with one with an ABEC between 1 and 5.

To start having quality bearings, start with ABEC-7.

This means that the higher the figure, the longer your acceleration will be and the more accuracy you will have on the road.

What is the most important part of a skateboard?

It is difficult to know exactly which is the most important since most of them are. To choose would be the trucks.

The reason is that they will make all the difference on a skateboard.

The fact of having a very resistant one that responds quickly to the turn and that on top of that is quite light will make all the difference in your performance.

You have a multitude of possibilities to do tricks with this part of this piece and you will be able to easily make turns.

This is very nice for any type of activity that you want to do whether it’s cruising, carving, downhill, or even street skateboarding.

They have their advantages from everywhere and you will greatly feel the difference between inexperience on the road between trucks, not of good quality and that of a very good brand.


Now you know everything about the anatomy of a skateboard and what constitutes it. Beginners need to know at least some information about each of the parts. This will come in handy if you want to set up your skateboard or if you need to change apart. Now, nothing is unknown to you anymore and you have all the information you need to make the right choice.

Leave a Reply

Your email address will not be published. Required fields are marked *